Cisco Cisco IOS Software Release 12.0(30)S
QoS: Match ATM OAM
How to Configure QoS: Match ATM OAM
9
Cisco IOS Release 12.0(30)S
Attaching the Policy Map to an Interface or a VC
Perform the following task to attach the policy map to an interface or a virtual circuit (VC).
Restrictions
This feature supports only policy maps attached to an ATM interface in the input direction.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface type number [name-tag]
4.
pvc [name] vpi | vci [ilmi | qsaal | smds]
5.
service-policy {input} policy-map-name
6.
exit
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
interface
type number [name-tag]
Example:
Router(config)# interface atm 0/0
Configures the interface type specified and enters interface
configuration mode.
configuration mode.
•
Enter interface type.
Step 4
pvc
[name] vpi|vci [ilmi|qsaal|smds]
Example:
Router(config-if)# pvc 0/60 l2transport
Creates or assigns a name to an ATM PVC, specifies the
encapsulation type on an ATM PVC, and enters ATM virtual
circuit configuration mode.
encapsulation type on an ATM PVC, and enters ATM virtual
circuit configuration mode.