Cisco Cisco IOS Software Release 12.4(2)XB6 Technische Referenzen
-23
Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
clear wimax agw subscriber
clear wimax agw subscriber
To clear the subscriber on the BWG, use the clear wimax agw subscriber command in privileged EXEC
configuration mode.
configuration mode.
clear wimax agw subscriber [mac-id mac-id ] [local]
Syntax Description
Defaults
There are no default values.
Command Modes
Privileged EXEC configuration.
Command History
Usage Guidelines
Note
All clear wimax commands are valid only on the SR ACTIVE card.
For example:
router#clear wimax agw subscriber all
This is STANDBY unit. This command must be issued on the ACTIVE unit
Examples
The following example clears subscribers locally:
clear wimax agw subscriber local
mac-id mac-id
Specifies the MAC ID of the subscriber. If the MACID is not specified the
entire subscriber list is cleared.
entire subscriber list is cleared.
local
If the local keyword is configured, the subscribers are cleared locally,
otherwise de-registration is sent to the base station.
otherwise de-registration is sent to the base station.
Release
Modification
12.4(15)XL
This command was introduced.