Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques

To clear the subscriber on the BWG, use the clear wimax agw subscriber command in privileged EXEC 
configuration mode. 

clear wimax agw subscriber [mac-id mac-id ] [local]

There are no default values.

Privileged EXEC configuration.

All clear wimax commands are valid only on the SR ACTIVE card. 

For example:

router#clear wimax agw subscriber all

This is STANDBY unit. This command must be issued on the ACTIVE unit

The following example clears subscribers locally:

clear wimax agw subscriber local

mac-id mac-id 

Specifies the MAC ID of the subscriber. If the MACID is not specified the 
entire subscriber list is cleared.

If the local keyword is configured, the subscribers are cleared locally, 
otherwise de-registration is sent to the base station.

12.4(15)XL

This command was introduced.