Cisco Cisco IOS Software Release 12.2(33)SXH

Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

© 2006–2007 Cisco Systems, Inc. All rights reserved.

The SNMP Support for VPNs feature allows the sending and receiving of SNMP notifications (traps and 
informs) using VPN routing and forwarding (VRFs) tables. In particular, this feature adds support to 
Cisco IOS software for the sending and receiving of SNMP notifications (traps and informs) specific to 
individual Virtual Private Networks (VPNs).

The SNMP Support for VPNs feature provides configuration commands that allow users to associate 
SNMP agents and managers with specific VRFs. The specified VRF is used for the sending of SNMP 
notifications (traps and informs) and responses between agents and managers. If a VRF is not specified, 
the default routing table for the VPN is used. 

Configuration information is included in the “Configuring SNMP Support” module of the 

, Release 12.4,

at the following URL:

The following sections provide information about this feature:

SNMP Support for VPNs

Configuring SNMP Support for VPNs

Configuring SNMP Support for VPNs: Example

For a complete list of features included in the “Configuring SNMP Support” module, see the Feature 
Information table located near the end of the module.