Cisco Cisco IOS Software Release 12.2(33)SXH
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006–2007 Cisco Systems, Inc. All rights reserved.
SNMP Support for VPNs
The SNMP Support for VPNs feature allows the sending and receiving of SNMP notifications (traps and
informs) using VPN routing and forwarding (VRFs) tables. In particular, this feature adds support to
Cisco IOS software for the sending and receiving of SNMP notifications (traps and informs) specific to
individual Virtual Private Networks (VPNs).
informs) using VPN routing and forwarding (VRFs) tables. In particular, this feature adds support to
Cisco IOS software for the sending and receiving of SNMP notifications (traps and informs) specific to
individual Virtual Private Networks (VPNs).
The SNMP Support for VPNs feature provides configuration commands that allow users to associate
SNMP agents and managers with specific VRFs. The specified VRF is used for the sending of SNMP
notifications (traps and informs) and responses between agents and managers. If a VRF is not specified,
the default routing table for the VPN is used.
SNMP agents and managers with specific VRFs. The specified VRF is used for the sending of SNMP
notifications (traps and informs) and responses between agents and managers. If a VRF is not specified,
the default routing table for the VPN is used.
Configuration Information
Configuration information is included in the “Configuring SNMP Support” module of the
, Release 12.4,
at the following URL:
The following sections provide information about this feature:
•
SNMP Support for VPNs
•
Configuring SNMP Support for VPNs
•
Configuring SNMP Support for VPNs: Example
For a complete list of features included in the “Configuring SNMP Support” module, see the Feature
Information table located near the end of the module.
Information table located near the end of the module.