Cisco Cisco IOS XR Software Release 3.2

The following packages are required for upgrading IOS XR software from Release 3.2.0 to Release 3.2.2 
on Cisco CRS-1. 

The filenames listed here may not necessarily be the filenames of the actual files since the files can be 
renamed. Changing the PIE filenames does not affect the operation of the PIE file.

 describes the SMU required to perform the upgrade from Release 3.2.0 to Release 3.2.2 on a 

Cisco CRS-1.

Use the following procedure to install the SMU on the Cisco CRS-1:

Enter the admin EXEC mode.

RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)#

Add the hfr-base-3.2.0.CSCei45039.pie SMU to disk0:.

RP/0/RP0/CPU0:router(admin)# install add <device or 
tftp:/ftp:/rcp:>/hfr-base-3.2.0.CSCei45039.pie to disk0:

Activate the hfr-base-3.2.0.CSCei45039-1.0.0 SMU.

RP/0/RP0/CPU0:router(admin)# install activate disk0:hfr-base-3.2.0.CSCei45039-1.0.0

Cisco IOS XR Unicast Routing Core Bundle 
(OS-MBI, Base, Admin, Fwdg, lc Rout)

comp-hfr-mini.pie-3.2.2 (required)

Multicast Package

hfr-mcast-p.pie-3.2.2 (optional)

Manageability Package

hfr-mgbl-p.pie-3.2.2 (optional)

MPLS Package

hfr-mpls-p.pie-3.2.2 (optional)

Security Package

hfr-k9sec-p.pie-3.2.2 (optional)

SMU Filename

hfr-base-3.2.0.CSCei045039.pie 

DDTS

CSCei045039: Config loss when upgrading from 3.2.0 to 3.2.x 
release.

SMU Install Impact

Low. There should be no impact to running system.

Problem Summary

Config lost when upgrading from 3.2.0 to 3.2.2 release.