Cisco Cisco IPS 4255 Sensor
13
Release Notes for Cisco Intrusion Prevention System 7.1(8)E4
OL-30202-01
Reimaging the Sensor
To apply the 7.1(8)E4 service pack to sensors using CSM 4.3 SP2 or CSM 4.4 SP2, follow these steps:
Step 1
Download the service pack ZIP file, IPS-CSM-K9-7.1-8-E4.zip, to the
<CSM-install-dir>/MDC/ips/updates directory.
<CSM-install-dir>/MDC/ips/updates directory.
Step 2
Launch the IPS Update Wizard from Tools > Apply IPS Update.
Step 3
Select Sensor Updates from the drop down menu, and then select the IPS-CSM-K9-7.1-8-E4.zip file.
Step 4
Click Next.
Step 5
Select the device(s) to which you want to apply the service pack, then click Finish.
Step 6
Create a deployment job and deploy to sensor(s) using Deployment Manager. You can launch
Deployment Manager from Tools > Deployment Manager.
Deployment Manager from Tools > Deployment Manager.
Step 7
Click Deploy in the popup and follow the instructions.
Reimaging the Sensor
This section describes how to reimage the sensor using the system image, and contains the following
topics:
topics:
•
•
•
•
•
•
•
•
Installing the IPS 4240 and IPS 4255 System Image
Note
This procedure is for the IPS 4240, but is also applicable to the IPS 4255. The system image for the
IPS 4255 has “4255” in the filename.
IPS 4255 has “4255” in the filename.