Cisco Cisco IPS 4255 Sensor
16
Release Notes for Cisco Intrusion Prevention System 7.0(1)E3
OL-18483-01
Upgrading to Cisco IPS 7.0(1)E3
describes the platform identifiers used in platform-specific names.
Upgrading to Cisco IPS 7.0(1)E3
This section provides information on upgrading to Cisco IPS 7.0(1)E3, and contains the following
topics:
topics:
•
•
Upgrade Notes and Caveats
The following upgrade notes and caveats apply to upgrading to 7.0(1)E3:
•
The minimum required version for upgrading to 7.0(1)E3 is 5.1(6) or later.
•
You must have a valid Cisco Service for IPS Maintenance contract per sensor to receive and use
software upgrades from Cisco.com.
software upgrades from Cisco.com.
•
Use IPS-AIM-K9-7.0-1-E3.pkg to upgrade the AIM IPS and IPS-NME-K9-7.0-1-E3 to upgrade the
NME IPS. For all other supported sensors, use the IPS-K9-7.0-1-E3.pkg upgrade file.
NME IPS. For all other supported sensors, use the IPS-K9-7.0-1-E3.pkg upgrade file.
Bootloader
As needed
bl
AIM IPS
NME IPS
NME IPS
pse_aim_x.y.z.bin
pse_nm_x.y.z.bin
(where x, y, z is the release number)
pse_nm_x.y.z.bin
(where x, y, z is the release number)
Mini-kernel
As needed
mini-kernel AIM IPS
NME IPS
pse_mini_kernel_1.1.10.64.bz2
1.
The system image includes the combined recovery and application image used to reimage an entire sensor.
2.
The maintenance partition image includes the full image for the IDSM2 maintenance partition. The file is installed from but
does not affect the IDSM2 application partition.
does not affect the IDSM2 application partition.
Table 2
Platform-Dependent Release Examples (continued)
Release
Target
Frequency
Frequency
Identifier
Supported
Platform
Platform
Example Filename
Table 3
Platform Identifiers
Sensor Family
Identifier
IPS-4240 series
4240
IPS-4255 series
4255
IPS-4260 series
4260
IPS 4270-20 series
4270_20
IDS module for Catalyst 6K
IDSM2
IPS network module
AIM
NME
NME
Adaptive security appliance
modules
modules
SSM_10
SSM_20
SSM_40
SSM_20
SSM_40