Cisco Cisco IPS 4255 Sensor Installationsanleitung
4
Removing and Installing Interface Cards in Cisco IPS-4260 and IPS 4270-20
78-19056-01
Supported Interface Cards
shows the 4GE bypass interface card.
Figure 1
4GE Bypass Interface Card
2SX Interface Card
The 2SX interface card (part numbers IPS-2SX-INT and IPS-2SX-INT=) provides two 1000BASE-SX
(fiber) monitoring interfaces. The IPS-4260 supports up to two 2SX interface cards for a total of four SX
interfaces. The IPS 4270-20 supports up to six 2SX interface cards for a total of twelve SX interfaces.
(fiber) monitoring interfaces. The IPS-4260 supports up to two 2SX interface cards for a total of four SX
interfaces. The IPS 4270-20 supports up to six 2SX interface cards for a total of twelve SX interfaces.
The 2SX card ports require a multi-mode fiber cable with an LC connector to connect to the SX interface
of the sensor.
of the sensor.
The 2SX interface card does not support hardware bypass.
shows the 2SX interface card.
Figure 2
2SX Interface Card
10GE Interface Card
The 10GE interface card (part numbers IPS-2X10GE-SR-INT and IPS-2X10GE-SR-INT=) provides two
10000 Base-SX (fiber) interfaces. The IPS-4260 supports one 10GE interface card for a total of two
10GE fiber interfaces. The IPS 4270-20 supports up to two 10GE interface cards for a total of four 10GE
fiber interfaces.
10000 Base-SX (fiber) interfaces. The IPS-4260 supports one 10GE interface card for a total of two
10GE fiber interfaces. The IPS 4270-20 supports up to two 10GE interface cards for a total of four 10GE
fiber interfaces.
The card ports require a multi-mode fiber cable with an LC connector to connect to the SX interface of
IPS-4260 and IPS 4270-20.
IPS-4260 and IPS 4270-20.
153325
190474