Cisco Cisco NAC Profiler 3.1.0

See 

 for details on the latest release 3.1.0 builds. 

For ordering information, refer to the

This section describes the following:

 shows Cisco NAC Appliance and Cisco NAC Profiler compatibility and software versions 

supported for each component of the Cisco NAC Profiler solution. For proper operation, both the Profiler 
Collector(s) and Profiler Server (Profiler Server or Profiler Lite) must run the same version of the Cisco 
NAC Profiler software.

Cisco NAC Profiler release 3.1.0 replaces and supersedes all previous releases. If running Cisco NAC 
Profiler release 2.x, upgrade your Cisco NAC Profiler appliance and Profiler Collector components to 
the latest available supported 3.1.0 release build.To upgrade a Cisco NAC Profiler system running 
version 2.1.8 or earlier to the Cisco NAC Profiler 3.1.0 release, refer to 

.

Cisco NAC Appliance 4.7 releases are shipped with Collector version 2.1.8-39 by default. When 
upgrading the NAC Server to a newer Cisco NAC Appliance release, the current version of the Collector 
is replaced with the default version of the Collector shipped with the Cisco NAC Appliance release. For 
example, if you are running NAC 4.7(1) and Profiler 3.1 and you upgrade to NAC 4.7(2), you need to 
manually re-install the 3.1.0 Collector and configure it after the NAC Server upgrade.

1.

The Collector component and the Profiler Server must run the same version of the Cisco NAC Profiler software to 
inter-operate (e.g. 3.1.0-24).

2.

Each version of the NAC Server software is shipped with a default version of the Profiler Collector component starting from 
Cisco NAC Appliance release 4.1.2.1 and later. The Profiler Collector can be upgraded independently of the NAC Server 
software for compatibility with a later Profiler Server/Profiler Lite Server release.

4.7(2)

2.1.8-39

3.1.0-24

5

3.1.0-24

4.7(1)

2.1.8-39

4.6(1)

2.1.8-37