Cisco Cisco Clean Access 3.5

The general sequence to configure the standby CAS is as follows:

 

 

 

Access the web console for the standby CAS by opening a web browser and typing the IP address 
of the trusted (eth0) interface of the standby CAS in the URL/address field, as follows: 
https://<StandbyCAS_eth0_IP>/admin (for example, 

) 

Log in as user 

 (default password is 

). (It is recommended that you change the default 

password for the CAS to ensure the security of your network environment.) 

In order to copy and paste values to/from configuration forms, it is recommended to keep both web 
consoles open for each CAS (primary and standby). See also 

.

To ensure security, it is recommended to change the default password of the CAS. 

In the Network Settings page, open the DNS tab. 

Change the host name to the unique host name for the standby CAS, such as 

. You must 

have the same domain name specified in this tab as you did for the primary Clean Access Server (see 

Click the Failover Setting tab and select HA-Standby Mode from the Choose Clean Access 
Server Mode dropdown menu.