Cisco Cisco Email Security Appliance C160 Betriebsanweisung
3-13
Cisco AsyncOS 8.5.5 for Email Security User Guide
Chapter 3 Setup and Installation
Using the System Setup Wizard
Caution
The Email Security appliance ships with a default IP address of
192.168.42.42
on the Management
port of all systems except C160/C170 systems, which use the Data 1 port instead. Before connecting the
appliance to your network, ensure that no other device’s IP address conflicts with this factory default
setting. If you are configuring a Cisco Content Security Management appliance, please see
appliance to your network, ensure that no other device’s IP address conflicts with this factory default
setting. If you are configuring a Cisco Content Security Management appliance, please see
If you are connecting multiple factory-configured content security appliances to your network, add them
one at a time, reconfiguring each appliance’s default IP address as you go.
one at a time, reconfiguring each appliance’s default IP address as you go.
Accessing the Web-Based Graphical User Interface (GUI)
To access the web-based Graphical User Interface (GUI), open your web browser and point it to
192.168.42.42.
192.168.42.42.
The login screen is displayed:
Figure 3-3
Logging in to the Appliance
Log in to the appliance by entering the username and password below.
Factory Default Username and Password
•
Username:
admin
•
Password:
ironport
Note
If your session times out, you will be asked to re-enter your username and password. If your session
times out while you are running the System Setup Wizard, you will have to start over again.
times out while you are running the System Setup Wizard, you will have to start over again.
Defining Basic Configuration Using the Web-Based System Setup Wizard
Procedure
Step 1
Launch the System Setup Wizard
•
Log in to the graphical user interface as described in
.
•
On brand new (not upgraded from previous releases of AsyncOS) systems, your browser will
automatically be redirected to the System Setup Wizard.
automatically be redirected to the System Setup Wizard.
•
Otherwise, on the System Administration tab, click System Setup Wizard in the list of links on the
left.
left.