Cisco Cisco 521 Wireless Express Access Point Installationsanleitung
20
OL-16715-01
Step 3
Remove a ceiling tile adjacent to the mounting location.
Step 4
Configure the ends of the T-bar box hanger to allow for maximum
clearance above the ceiling tile.
clearance above the ceiling tile.
Step 5
Open the access point cover and connect the Ethernet cable to the
access point.
access point.
Step 6
Attach the access point to the access point mounting bracket.
Step 7
Attach the T-rail clips on each end of the T-bar box hanger to the
ceiling grid T-rails. Make sure the clips are securely attached to the
T-rails.
ceiling grid T-rails. Make sure the clips are securely attached to the
T-rails.
Step 8
Connect a drop wire to a building structural element and the hole
provided in the bracket mounting clip. This additional support is
required in order to comply with the U.S. National Electrical Safety
Code.
provided in the bracket mounting clip. This additional support is
required in order to comply with the U.S. National Electrical Safety
Code.
121839