Cisco Cisco 521 Wireless Express Access Point Installationsanleitung

Quick Start Guide: Cisco 521 Wireless Express Access Point

Step 9

If you need additional security, you can secure the access point to a
nearby immovable object using a Kensington lock and security
cable.

Step 10

Verify that the access point is operating properly and then replace
the ceiling tile.

Mounting on a Network Cable Box

Follow these steps to mount the access point on a network cable box.

Step 1

Position the mounting plate over the network cable box and align
the two mounting holes (labeled X) with the network cable box
holes.

Step 2

Hold the mounting plate and insert a 6 x 32 x 1/4 in. pan head screw
into each of the two X mounting holes and tighten.

Step 3

Pull the access point cables out of the network box until there is
about 1 ft. of exposed cables protruding from the box.

Step 4

Attach the access point to the mounting plate.

Step 5

Connect the cables to the access point.