Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Modes Commands (D-S)
diameter disable endpoint ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
diameter disable endpoint
This command disables a diameter peer without removing the peer‘s configuration.
Product
PDIF, SCM
Privilege
Security Administrator, Administrator
Syntax
Specifies the endpoint in which the peer is configured.
must be the endpoint name, and must be a string of 1 through 63 characters in length.
Specifies the peer to be disabled.
must be the diameter peer host name, and must be a string of 1 through 63 characters in length.
Usage
Use this command to administratively disable a diameter peer without removing the peer configuration. This
command will tear down all connections on the specified peer (by sending a DPR if the configuration
demands the same at peer level configuration). The peer will remain in disabled state until it is enabled again.
Also see the
command will tear down all connections on the specified peer (by sending a DPR if the configuration
demands the same at peer level configuration). The peer will remain in disabled state until it is enabled again.
Also see the
command.
Example
This command disables the diameter peer
This command disables the diameter peer
: