Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Modes Commands (D-S)
diameter reset connection ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
diameter reset connection
This command resets individual TCP/SCTP connections.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Resets connection to the specified endpoint.
must be the endpoint name, and must be an alpha and/or numeric string of 1 through 63
characters in length.
Resets connection to the specified peer.
must be the Diameter peer host name, and must be an alpha and/or numeric string of 1 through 63
characters in length.
Usage
Use this command to reset the TCP/SCTP connections for the specified endpoint/peer. With this command,
the connection will be closed temporarily after DPR/DPA. If there is any traffic to be sent to the particular
peer, then the connection will be re-established.
This command overrides the endpoint configured in any other configuration mode.
This command is applicable only when the specified peer is enabled.
the connection will be closed temporarily after DPR/DPA. If there is any traffic to be sent to the particular
peer, then the connection will be re-established.
This command overrides the endpoint configured in any other configuration mode.
This command is applicable only when the specified peer is enabled.
Example
This command resets connection to the specified endpoint:
This command resets connection to the specified endpoint: