Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Firewall-and-NAT Policy Configuration Mode Commands
▀ firewall ip-reassembly-failure
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
firewall ip-reassembly-failure
This command configures Stateful Firewall action on packets involved in IP Reassembly Failure scenarios.
Product
FW
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default:
Default:
Specifies to drop packets involved in IP reassembly failure scenarios.
Specifies to permit packets involved in IP reassembly failure scenarios.
Usage
Use this command to configure Stateful Firewall action on packets involved in IP reassembly failure
scenarios such as missing fragments, overlapping offset, etc.
For NAT-only calls, packets involved in IP reassembly failure scenarios are dropped.
scenarios such as missing fragments, overlapping offset, etc.
For NAT-only calls, packets involved in IP reassembly failure scenarios are dropped.
Example
The following command specifies to drop packets involved in IP reassembly failure scenarios:
The following command specifies to drop packets involved in IP reassembly failure scenarios: