Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Firewall-and-NAT Policy Configuration Mode Commands
firewall malformed-packets ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
firewall malformed-packets
This command configures Stateful Firewall action on malformed packets.
Product
FW
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default:
Default:
Specifies to drop malformed packets.
Specifies to permit malformed packets.
Usage
Use this command to configure Stateful Firewall action on malformed packets.
For NAT-only calls, malformed packets are always permitted.
For NAT-only calls, malformed packets are always permitted.
Example
The following command specifies Stateful Firewall to drop malformed packets:
The following command specifies Stateful Firewall to drop malformed packets: