Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Global Configuration Mode Commands
▀ threshold poll route-service
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
threshold poll route-service
This command configures the polling interval over which to count or measure the thresholding value for route services
on the system.
on the system.
Product
All
Privilege
Administrator Security Administrator
Syntax
Restores the threshold poll interval value to its default value of 900 seconds.
Default: 900 seconds
Specifies the amount of time that comprises the polling interval over which to count the total number of BGP
route on the system.
Specifies the amount of time that comprises the polling interval over which to count the total number of BGP
route on the system.
is measured in seconds and can be configured to any integer value from 30 to 60000.
Usage
This command dictates the time period over which to monitor the specified value for threshold crossing.
Important:
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a polling
interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the
and
commands for additional information
on the system‘s support for thresholding.
Example
The following command configures the polling interval for the total BGP routes threshold polling duration value to 600
seconds (10 minutes):
The following command configures the polling interval for the total BGP routes threshold polling duration value to 600
seconds (10 minutes):