Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
ASN Gateway Service Configuration Mode Commands
setup-timeout ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
setup-timeout
Configures the total amount of allowable time for the ASN GW service to setup a connection with the BS before it
marks the BS as unreachable.
marks the BS as unreachable.
Product
ASN GW
Privilege
Administrator
Syntax
Sets the total timeout duration to 60 seconds to setup a connection with BS.
Default: 60
Specifies the maximum allowable time for the ASN GW service to setup the R6 connection with BS before
marks the BS as unreachable.
Specifies the maximum allowable time for the ASN GW service to setup the R6 connection with BS before
marks the BS as unreachable.
is measured in seconds and can be configured to any integer value between 1 and 100000.
Usage
Use this command to configure the maximum setup timeout duration to setup an R6 connection with BS. This
command supersedes the duration set through the
command supersedes the duration set through the
and
commands for R6 connection.
The chassis is shipped from the factory with the connection setup timeout duration to 60 seconds.
Example
The following command configures an ASN GW service to mark a BS after waiting for
The following command configures an ASN GW service to mark a BS after waiting for
seconds before marks it as
dead or unreachable: