Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Diameter Endpoint Configuration Mode Commands
tls ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
tls
This command enables/disables the Transport Layer Security (TLS) support between a Diameter client and Diameter
server node.
server node.
Product
ECS
Privilege
Security Administrator, Administrator
Syntax
Disables the TLS support at Diameter endpoint.
Specifies the certificate for TLS support.
must be an encrypted certificate, and must be an alpha and/or numeric string of 700 through
900 characters in length.
Specifies the password for TLS support.
must be an encrypted password, and must be an alpha and/or numeric string of 6 through 50
characters in length.
Specifies the private key for TLS support.
must be an encrypted key, and must be an alpha and/or numeric string of 900 through 1500
characters in length.
Usage
Use this command to configure TLS support between a Diameter client and Diameter server node. By default,
TLS is disabled.
TLS is disabled.
Important:
Both the Diameter client and server must be configured with TLS enabled or TLS disabled;
otherwise, the Diameter connection will be rejected.
Example
The following commands enable the TLS between a Diameter client and Diameter server node:
The following commands enable the TLS between a Diameter client and Diameter server node: