Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Modes Commands (D-S)
gtpc test echo ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
gtpc test echo
Tests the ability of a GGSN service to exchange GTP-C echo request messages with the specified SGSN(s).
Product
GGSN
Privilege
Security Administrator, Administrator, Operator
Syntax
Specifies the IP address of a Gn interface configured on the system.
must be expressed in dotted decimal notation.
Important:
The IP address of the system‘s Gn interface must be bound to a configured GGSN service prior to
executing this command.
Specifies that GTP-C echo requests will be sent to all SGSNs that currently have sessions with the GGSN
service.
service.
Specifies that GTP-C echo requests will be sent to a specific SGSN.
is the address of the SGSN to send the requests to and must be expressed in dotted decimal
notation.
Usage
This command tests the GGSN‘s ability to exchange GPRS Tunneling Protocol control plane (GTP-C)
packets with the specified SGSNs which can be useful troubleshooting and/or monitoring.
This command must be executed from within the context in which the GGSN service is configured.
Refer also to the gtpu test command.
packets with the specified SGSNs which can be useful troubleshooting and/or monitoring.
This command must be executed from within the context in which the GGSN service is configured.
Refer also to the gtpu test command.
Example
The following command issues GTP-C echo packets from a GGSN service bound to address 192.168.157.32 to an
SGSN with an address of 192.168.157.2:
The following command issues GTP-C echo packets from a GGSN service bound to address 192.168.157.32 to an
SGSN with an address of 192.168.157.2: