Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
GRE Tunnel Interface Configuration Mode Commands
source ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
source
This command configures the source IPv4 address of the tunnel either by specifying the IP address (host address) or by
specifying another configured non-tunnel IPv4 interface. This is a mandatory configuration for GRE tunnel interface.
specifying another configured non-tunnel IPv4 interface. This is a mandatory configuration for GRE tunnel interface.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes/disassociates the configured source IP address or host interface from specific GRE tunnel interface
configuration.
configuration.
Configures the IP address for the interface specifying the IPv4 IP address.
must be specified using the standard IPv4 dotted decimal notation.
Specifies the name of the preconfigured non-tunnel IPv4 interface, whose address is used as the source
address of the GRE tunnel.
address of the GRE tunnel.
Usage
Use this command to configure the source IPv4 address of the tunnel either by specifying the IP address (host
address) or by specifying another configured non-tunnel IPv4 interface for GRE tunnel interface.
address) or by specifying another configured non-tunnel IPv4 interface for GRE tunnel interface.
Important:
State of source address will affect the operational state of the tunnel.
Example
The following command sets the 1.2.3.4 as source IP address of the GRE tunnel interface:
The following command sets the 1.2.3.4 as source IP address of the GRE tunnel interface: