Cisco Cisco Packet Data Gateway (PDG) Wartungshandbuch
Configuration Management
Generally Available 06-30-2010
3-62
network-initiated-pdp-activation
This command configures the Operator Policy to support activation of network-initiated PDP contexts
and defines any desired activation restrictions
.
CLI (SGSN Operator Policy Configuration Mode)
network-initiated-pdp-activation {allow | primary | restrict | secondary} +
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
network-overload-protection
This new command enables an attach rate throttle mechanism to configure the number of
attaches per second and to specific the action to be taken if the limit is exceeded.
attaches per second and to specific the action to be taken if the limit is exceeded.
CLI (Global Configuration Mode)
network-overload-protection sgsn-new-connections-per-second #_attaches
action { drop | reject with cause { congestion | network failure } }
default network-overload-protection sgsn-new-connections-per-second
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
peer-network-service-entity
The command creates a Peer Network Service Entity instance in the Network Service Entity
IP configuration mode to define the peer network service entity.
IP configuration mode to define the peer network service entity.
CLI (Network Service Entity IP Configuration Mode)
[ no ] peer-network-service-entity name name
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
pool
This command enables the default SGSN functionality for SGSN (flex) pooling and enables
inclusion of the configured count for pool hop-counter in new SGSN context/identify
request messages.
inclusion of the configured count for pool hop-counter in new SGSN context/identify
request messages.
CLI (SGTP Service Configuration Mode)
pool { default-sgsn | hop-counter count }
default pool hop-counter
no pool { default-sgsn | hop-counter }
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.