Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Broadcast Multicast Service
Configuring BCMCS ▀
Cisco ASR 5000 Series Enhanced Feature Configuration Guide ▄
OL-22982-01
Configuring BCMCS
To configure the system for BCMCS:
Step 1
Configure the system for PDSN functionality as described in the PDSN Administration Guide.
Step 2
Set the BCMCS group user name and password for RADIUS access as described in the
section.
Step 3
Create a multicast group profile on your RADIUS server to achieve BCMCS functionality as described in the
Step 4
Save your configuration as described in the Verifying and Saving Your Configuration chapter.
Important:
Commands used in the configuration examples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
BCMCS Group Configuration
Use the following example to set the BCMCS group user name and password for RADIUS access:
RADIUS Server Configuration
You must create a multicast group profile on your RADIUS server to achieve BCMCS functionality. The group name
and password must be the same as configured in
and password must be the same as configured in
For information about the supported BCMCS attributes, refer to the AAA Interface Administration and Reference.