Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
PDN Gateway Configuration
▀ Configuring the System as a Standalone PMIP P-GW Supporting an eHRPD Network
▄ Cisco ASR 5000 Series Packet Data Network Gateway Administration Guide
OL-22985-01
Required
Information
Information
Description
P-GW Service Configuration
P-GW service
name
name
An identification string from 1 to 63 characters (alpha and/or numeric) by which the P-GW service will be
recognized by the system.
Multiple names are needed if multiple P-GW services will be used.
recognized by the system.
Multiple names are needed if multiple P-GW services will be used.
PLMN ID
MCC number: The mobile country code (MCC) portion of the PLMN’s identifier (an integer value between
100 and 999).
MNC number: The mobile network code (MNC) portion of the PLMN’s identifier (a 2 or 3 digit integer value
between 00 and 999).
100 and 999).
MNC number: The mobile network code (MNC) portion of the PLMN’s identifier (a 2 or 3 digit integer value
between 00 and 999).
LMA Service Configuration
LMA Service
Name
Name
An identification string from 1 to 63 characters (alpha and/or numeric) by which the LMA service will be
recognized by the system.
recognized by the system.
Required PDN Context Configuration Information
The following table lists the information that is required to configure the PDN context on a P-GW.
Table 15.
Required Information for PDN Context Configuration
Required
Information
Information
Description
P-GW context name An identification string from 1 to 79 characters (alpha and/or numeric) by which the P-GW context is
recognized by the system.
IP Address Pool Configuration
IPv4 address pool
name and range
name and range
An identification string between 1 and 31 characters (alpha and/or numeric) by which the IPv4 pool is
recognized by the system.
Multiple names are needed if multiple pools will be configured.
A range of IPv4 addresses defined by a starting address and an ending address.
recognized by the system.
Multiple names are needed if multiple pools will be configured.
A range of IPv4 addresses defined by a starting address and an ending address.
IPv6 address pool
name and range
name and range
An identification string between 1 and 31 characters (alpha and/or numeric) by which the IPv6 pool is
recognized by the system.
Multiple names are needed if multiple pools will be configured.
A range of IPv6 addresses defined by a starting address and an ending address.
recognized by the system.
Multiple names are needed if multiple pools will be configured.
A range of IPv6 addresses defined by a starting address and an ending address.
Access Control List Configuration
IPv4 access list
name
name
An identification string between 1 and 47 characters (alpha and/or numeric) by which the IPv4 access list is
recognized by the system.
Multiple names are needed if multiple lists will be configured.
recognized by the system.
Multiple names are needed if multiple lists will be configured.
IPv6 access list
name
name
An identification string between 1 and 79 characters (alpha and/or numeric) by which the IPv6 access list is
recognized by the system.
Multiple names are needed if multiple lists will be configured.
recognized by the system.
Multiple names are needed if multiple lists will be configured.