Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
PDN Gateway Configuration
▀ Configuring the System as a Standalone PMIP P-GW Supporting an eHRPD Network
▄ Cisco ASR 5000 Series Packet Data Network Gateway Administration Guide
OL-22985-01
P-GW Service Configuration
Step 1
Configure the P-GW service by applying the example configuration in the
Step 2
Specify an IP route to the HRPD Serving Gateway by applying the example configuration in the
Configuring the P-GW Service
Use the following example to configure the P-GW service:
Notes:
QCI-QoS mapping configurations are created in the AAA context. Refer to the
section for more information.
External authorization is performed by the 3GPP AAA server through the S6b interface. Internal authorization
(APN) is default.
The
command configures a Fully Qualified Domain Name for the P-GW service used in messages
between the P-GW and a 3GPP AAA server over the S6b interface.
Configuring a Static IP Route
Use the following example to configure static IP routes for data traffic between the P-GW and the HSGW: