Cisco Cisco AP541N Wireless Access Point Wartungshandbuch
Clustering Multiple Access Points
Managing Access Points in the Cluster
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
131
7
Figure 33 Cluster Information and Member Configuration
If clustering is currently disabled on the access point, the Enable Clustering
button is visible. If clustering is enabled, the Disable Clustering button is visible.
You can enter clustering option information whether clustering is enabled or
disabled.
button is visible. If clustering is enabled, the Disable Clustering button is visible.
You can enter clustering option information whether clustering is enabled or
disabled.
describes the configuration and status information available on the
cluster Access Points page when clustering is enabled.
Table 35 Access Points in the Cluster
Field
Description
Status
If the status field is visible, the access point is
enabled for clustering. If clustering is not enabled,
then the access point is operating in stand-alone
mode and none of the information in this table is
visible.
enabled for clustering. If clustering is not enabled,
then the access point is operating in stand-alone
mode and none of the information in this table is
visible.
To disable clustering on the access point, click
Disable Clustering.
Disable Clustering.
Location
Description of where the access point is physically
located.
located.