Cisco Cisco Packet Data Gateway (PDG)
Routing
▀ Bidirectional Forwarding Detection
▄ ASR 5500 System Administration Guide, StarOS Release 17
256
bfd interval interval_value min_rx rx_value multiplier multiplier_value
[ [no] bfd echo ]
exit
Configure a Multihop BFD session.
bfd-protocol
bfd multihop peer destination-address interval interval-value
multiplier multiplier-value
multiplier multiplier-value
Scaling of BFD
Configure an active BFD session using one of the above methods and use same BFD neighbor while configuring the
active interface. For additional information, see
active interface. For additional information, see
bfd-protocol
bfd nbr-group-name grp_name active-if-name if_name nexthop_address
Apply the same BFD results to one or more passive interfaces.
bfd nbr-group-name grp_name passive-if-name if_name nexthop_address
bfd nbr-group-name grp_name passive-if-name if_name nexthop_address
Associating BGP Neighbors with the Context
config
context context_name
router bgp AS_number
neighbor neighbor_ip-address remote-as rem_AS_number
neighbor neighbor_ip-address ebgp-multihop max-hop max_hops
neighbor neighbor_ip-address update-source update-src_ip-address
neighbor neighbor_ip-address failover bfd [ multihop ]
Notes:
Repeat the sequence to add neighbors.