Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command save configuration. For additional information on how to verify and save configuration files, refer to the
System Administration Guide and the Command Line Interface Reference.

Important:

Commands used in the configuration examples in this section provide base functionality to the

extent that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands. Not all commands or keywords/variables may be supported or available.
Availability varies on the platform type and installed license(s).

Defining IP Access Lists for Internal CSS

IP ACLs specify what type of subscriber traffic and which direction (uplink, downlink, or both) traffic is redirected. The
IP ACL must be specified in the context in which subscriber authentication is performed.

Caution:

To minimize the risk of data loss, do not make configuration changes to ACLs while the system is

facilitating subscriber sessions.

Use the following configuration example to define an IP ACL for internal CSS; start in the Exec mode of the CLI:

configure

context <context_name>

ip access-list <acl_name>

redirect css service <service_name> <keywords> <options>

end