Cisco Cisco Packet Data Gateway (PDG)
dhcpv6-server-preference
Specifies the waiting time for DHCPv6 client before response.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > DHCP Server Profile Configuration
configure > context context_name > dhcp-server-profile profile_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-dhcp-server-profile)#
Syntax Description
dhcpv6-server-preference pref_value
default dhcpv6-server-preference
default dhcpv6-server-preference
default
Returns the command to its default setting of 0.
pref_value
Specifies the DHCP server preference value as an integer from 1 through 255. If a DHCP server responds
with a preference value of 255, DHCPv6 client need not wait any longer.
with a preference value of 255, DHCPv6 client need not wait any longer.
Default: 0
Usage Guidelines
According to RFC-3315, DHCPv6 client should wait for a specified amount of time before considering
responses to its queries from DHCPv6 servers. Use this command to specify the waiting time (DHCP server
preference value) for DHCPv6 client before response.
responses to its queries from DHCPv6 servers. Use this command to specify the waiting time (DHCP server
preference value) for DHCPv6 client before response.
Examples
The following command sets the DHCP server preference value to 200:
dhcpv6-server-preference 200
dhcpv6-server-preference 200
Command Line Interface Reference, Modes C - D, StarOS Release 19
1734
DHCP Server Profile Configuration Mode Commands
dhcpv6-server-preference