Cisco Cisco Packet Data Gateway (PDG)
enable
Enables the specified options on the DHCP server.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > DHCP Server Profile Configuration
configure > context context_name > dhcp-server-profile profile_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-dhcp-server-profile)#
Syntax Description
enable { dhcpv6-server-reconf | dhcpv6-server-unicast | rapid-commit-dhcpv4 | rapid-commit-dhcpv6
}
dhcpv6-server-reconf
Enables support for reconfiguration messages from the DHCPv6 server.
By default, this is disabled.
dhcpv6-server-unicast
Disables server unicast option for DHCPv6 server.
By default, this is disabled.
rapid-commit-dhcpv4
Enables support of the rapid commit feature for DHCPv4 server functionality.
By default, this is disabled.
rapid-commit-dhcpv6
Enables support of the rapid commit feature for DHCPv6 server functionality.
By default, this is disabled; this is done to ensure that if there are multiple DHCPv6 servers in a network, with
rapid-commit-option, they would all end up reserving resources for the UE.
rapid-commit-option, they would all end up reserving resources for the UE.
Command Line Interface Reference, Modes C - D, StarOS Release 19
1736
DHCP Server Profile Configuration Mode Commands
enable