Cisco Cisco Packet Data Gateway (PDG)
initial-e1-framing
Configures the type of framing mode that will initially be available at the time the line card boots. (ASR 5000
only)
only)
Product
SGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Card Configuration
configure > card card_number
Entering the above command sequence results in the following prompt:
[local]
host_name
(config-card-
slot_number
)#
Syntax Description
initial-e1-framing [ crc4 | standard ]
default initial-e1-framing
default initial-e1-framing
default
Returns the configuration to CRC4 as the default type.
crc4
Accepts the default CRC4, in the configuration, as the initial at-boot framing mode.
standard
Accepts the standard mode as the initialization framing mode.
Usage Guidelines
For a CLC-type line card, the default E1 framing mode is CRC4. When a card reboots, all E1s are initialized
with CRC4 framing mode and then switch to the configured framing mode. With this keyword, you have the
option to choose the initialization framing mode.
with CRC4 framing mode and then switch to the configured framing mode. With this keyword, you have the
option to choose the initialization framing mode.
Only supported on CLC/CLC2
Important
Examples
initial-e1-framing standard
Command Line Interface Reference, Modes C - D, StarOS Release 19
313
Card Configuration Mode Commands
initial-e1-framing