Cisco Cisco Packet Data Gateway (PDG)
IPSG RADIUS Server Configuration Mode Commands
overlapping-ip-address ▀
Command Line Interface Reference, StarOS Release 16 ▄
6461
overlapping-ip-address
This command allows you to enable or disable overlapping of IP addresses which enables multiple users to use the same
IP address.
IP address.
Product
IPSG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IPSG RADIUS Server Configuration
configure > context context_name > ipsg-service service_name mode radius-server
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ipsg-service-radius-server)#
Syntax
[ default | no ] overlapping-ip-address
default
If previously configured, disables IPSG support of overlapping IP addresses.
Using overlapping IP addresses is disabled by default.
Using overlapping IP addresses is disabled by default.
no
If previously configured, disables IPSG support of overlapping IP addresses.
Usage
Use this command to enable or disable overlapping IP addresses for subscribers on different networks that are
independent of each other.
independent of each other.
Example
The following command enables IPSG overlapping of IP addresses:
overlapping-ip-address