Cisco Cisco Packet Data Gateway (PDG)
IPSG RADIUS Server Configuration Mode Commands
profile ▀
Command Line Interface Reference, StarOS Release 16 ▄
6463
profile
This command allows you to configure the IPSG/eWAG service to use APN or subscriber profile.
Important:
In release 14.0, eWAG service uses only the APN profile. In release 15.0, ReWAG uses the APN
profile and DeWAG uses the subscriber profile. Whereas, the IPSG service uses both APN and subscriber profiles.
Product
eWAG
IPSG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IPSG RADIUS Server Configuration
configure > context context_name > ipsg-service service_name mode radius-server
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ipsg-service-radius-server)#
Syntax
profile { APN [ default-apn apn_name ] | subscriber }
default profile
default
Configures this command with its default setting.
Default:
Default:
APN
APN
Specifies to use APN profile for the service.
default-apn apn_name
Important:
This option is supported only for the eWAG service.
Specifies the default APN to be used for the eWAG service.
apn_name
must be the name of an APN, it must be an alphanumeric string of 1 through 62 characters in
length, and can consist only of the alphabetic characters (A–Z and a–z), digits (0–9), dot (.), and the hyphen (-
).
).
subscriber
Important:
This option is supported only for the IPSG RADIUS Server service, and in release 15.0 for DeWAG
service. For the DeWAG service, this command must be configured with the
subscriber
option. This is because