Cisco Cisco Packet Data Gateway (PDG)
SAEGW Changes in Release 16
▀ SAEGW Enhancements for 16.0
▄ Release Change Reference, StarOS Release 16
406
CSCuj01136 - SAEGW : pdn-count is not working for multi APN scenario
Command Changes
condition
The following variables at Local Policy are no longer used and have been deprecated in this release:
cgi
ecgi
sai
tai
timer
CSCui21603 - SGW Honor ingress & egress DSCP & Support DSCP
marking @ APN profile
Feature Changes
Support for Honoring DSCP Ingress and Egress and DSCP Marking at the APN Profile
This feature will provide an operator with a configuration to set the DSCP value per APN profile, so different APNs can
have different DSCP markings as per QOS requirements for traffic carried by the APN. In addition, the
have different DSCP markings as per QOS requirements for traffic carried by the APN. In addition, the
qci-qos
mapping
table is updated with the addition of a
copy-outer
for copying the DSCP value coming in the encapsulation
header from the S1u interface to the S5 interface and vice-versa.
Previous Behavior:
1. The
qci-qos mapping
table was previously fetched from service.
2. The DSCP value in the encapsulated header was not getting relayed from s1-s5 and vice versa. Instead, a value
of 0 (zero) was sent in the encapsulation header.
New Behavior:
1. The
qci-qos-mapping
table will be fetched from the APN profile first. If there is no association in the apn-
profile for the
qci-qos-mapping
table then the service level configuration will be fetched for the
qci-qos
mapping
table.
2. The DSCP value in the encapsulated header will be relayed from s1-s5 and vice versa using the
copy-outer
option in the
qci-qos-mapping
table.
Command Changes
associate qci-qos-mapping
The
qci-qos-mapping
keyword has been added to the
associate
command in APN Profile Configuration Mode to
associate a QCI QOS mapping table with an APN profile.