Cisco Cisco Packet Data Gateway (PDG)

Página de 642
SAEGW Changes in Release 16   
▀  SAEGW Enhancements for 16.0 
 
 
▄  Release Change Reference, StarOS Release 16 
406 
   
CSCuj01136 - SAEGW : pdn-count is not working for multi APN scenario  
Command Changes 
 
condition
 
The following variables at Local Policy are no longer used and have been deprecated in this release: 
 
cgi 
 
ecgi 
 
sai 
 
tai 
 
timer 
CSCui21603 - SGW Honor ingress & egress DSCP & Support DSCP 
marking @ APN profile  
Feature Changes 
Support for Honoring DSCP Ingress and Egress and DSCP Marking at the APN Profile
 
This feature will provide an operator with a configuration to set the DSCP value per APN profile, so different APNs can 
have different DSCP markings as per QOS requirements for traffic carried by the APN. In addition, the 
qci-qos 
mapping
 table is updated with the addition of a 
copy-outer
 for copying the DSCP value coming in the encapsulation 
header from the S1u interface to the S5 interface and vice-versa.  
Previous Behavior:   
1.  The 
qci-qos mapping
 table was previously fetched from service. 
2.  The DSCP value in the encapsulated header was not getting relayed from s1-s5 and vice versa. Instead, a value 
of 0 (zero) was sent in the encapsulation header. 
New Behavior:   
1.  The 
qci-qos-mapping
 table will be fetched from the APN profile first. If there is no association in the apn-
profile for the 
qci-qos-mapping
 table then the service level configuration will be fetched for the 
qci-qos 
mapping
 table. 
2.  The DSCP value in the encapsulated header will be relayed from s1-s5 and vice versa using the 
copy-outer
 
option in the 
qci-qos-mapping
 table. 
Command Changes 
associate qci-qos-mapping
 
The 
qci-qos-mapping
 keyword has been added to the 
associate
 command in APN Profile Configuration Mode to 
associate a QCI QOS mapping table with an APN profile.