Cisco Cisco Prime Optical 10.3 Entwickleranleitung
Cisco Prime Optical 10.3 GateWay/CORBA Programmer Reference Guide
29
2.1.6.7 Autodiscovery
ONS 15327 autodiscovery is identical to ONS 15454 SONET autodiscovery, described in
2.1.7 ONS 15454 SDH
See the
for the ONS 15454 SDH software releases
that Prime Optical 10.3 supports.
2.1.7.1 Shelves
All supported ONS 15454 SDH NEs have exactly one shelf each, with the exception of the ONS
15454 SDH multiservice transport platform (MSTP) R7.0, which can have up to eight shelves
per NE.
15454 SDH multiservice transport platform (MSTP) R7.0, which can have up to eight shelves
per NE.
2.1.7.2 Slots
The ONS 15454 SDH has one shelf view supplemented with the top subrack Electrical Facility
Connection Assembly (EFCA) shelf and bottom subrack chassis. The main shelf has 17 slots
numbered 1 to 17 and contains cards that carry traffic. The EFCA shelf has 12 additional slots
numbered 18 to 29 and contains Front Mount Electrical Connection (FMEC) modules, the
ALM/PWR/MIC (A/P/M) module, and the CRFT/TMG/MIC (C/T/M) module. The Timing
Communications and Control-International (TCC-I) module must be in slot 7 or slot 11, the
A/P/M module must be in slot 23, and the C/T/M module must be in slot 24.
Connection Assembly (EFCA) shelf and bottom subrack chassis. The main shelf has 17 slots
numbered 1 to 17 and contains cards that carry traffic. The EFCA shelf has 12 additional slots
numbered 18 to 29 and contains Front Mount Electrical Connection (FMEC) modules, the
ALM/PWR/MIC (A/P/M) module, and the CRFT/TMG/MIC (C/T/M) module. The Timing
Communications and Control-International (TCC-I) module must be in slot 7 or slot 11, the
A/P/M module must be in slot 23, and the C/T/M module must be in slot 24.
2.1.7.3 Equipment
All cards in the ONS 15454 SDH R5.0 and later display administration and service states. For
earlier software releases, these states are not applicable and Prime Optical displays them as N/A.
earlier software releases, these states are not applicable and Prime Optical displays them as N/A.
2.1.7.3.1
Equipment Administration State
The attribute name is ACTUAL_EQUIPMENT_SERVICE_STATE and is displayed in
getAdditionalInfo for the equipment.
getAdditionalInfo for the equipment.
and
list the attribute values for the service state.
Table 2-7: Equipment Administration State (ONS 15454 SDH)
Attribute Value
Meaning
In Service
Places the entity In Service.
Auto in Service
Places the entity in Auto in Service. The circuit is out of service until it
receives a valid signal for the duration of the soak period, at which time
the circuit state changes to In Service. During the soak period, alarms
and loopbacks are suppressed but traffic is carried.
receives a valid signal for the duration of the soak period, at which time
the circuit state changes to In Service. During the soak period, alarms
and loopbacks are suppressed but traffic is carried.
Out of Service–Maintenance
Removes the entity from service for maintenance. Alarms are no longer
generated.
generated.
Out of Service
Removes the entity from service and disables it. Alarms are no longer
generated and traffic is not carried.
generated and traffic is not carried.