Cisco Headend System Release 2.5 Installationsanleitung
I-24
SR 2.5/3.5 Direct ASI Installation and Configuration Procedures
78-738190-01 Rev B
Set Up the BFS Source,
Continued
4. Click File and then select New.
Result: The Set Up BFS Source window opens.
5. Follow these instructions to configure the Set Up BFS Source window.
a) In the Source Name field, type ASI_BFS.
b) In the Source ID field, type a unique number greater than 201.
c) In the Source Type field, select BFS.
d) In the Transport Type field, select ASI In-band.
e) In the Data Rate field, type 1.0.
f) In the Block Size field, type 4000.
g) In the Indication Interval field, type 100.
h) Select enable.
i) In the Available Hosts field, highlight the hostname of the DNCS and
b) In the Source ID field, type a unique number greater than 201.
c) In the Source Type field, select BFS.
d) In the Transport Type field, select ASI In-band.
e) In the Data Rate field, type 1.0.
f) In the Block Size field, type 4000.
g) In the Indication Interval field, type 100.
h) Select enable.
i) In the Available Hosts field, highlight the hostname of the DNCS and
then click Add.
Result: The hostname of the DNCS moves to the Selected Hosts
Result: The hostname of the DNCS moves to the Selected Hosts
column.
j) Click Save.
Result: The system saves the BFS source configuration.
6. Go to Set the BIG Offline, next in this appendix.