Cisco Headend System Release 2.7 Installationsanleitung
Chapter 13 Configuring the System for Satellite and Terrestrial Support
164
4017650 Rev C
Provision a Cable SCS and MPEG Source for
Satellite and Terrestrial Transport
Satellite and Terrestrial Transport
For each satellite and terrestrial transport, you must provision a cable Simulcrypt
Synchronizer (SCS) and MPEG source. Complete the following steps to provision the
sources.
1 On the DNCS Administrative Console, click the DNCS tab.
2 Click the Network Element Provisioning tab.
3 Click Satellite/Terrestrial Transport. The Satellite Transport Parameters window
Synchronizer (SCS) and MPEG source. Complete the following steps to provision the
sources.
1 On the DNCS Administrative Console, click the DNCS tab.
2 Click the Network Element Provisioning tab.
3 Click Satellite/Terrestrial Transport. The Satellite Transport Parameters window
opens.
4 Click Add New to add a row to the screen.
5 Complete the fields as follows:
5 Complete the fields as follows:
TS ID. Enter the ID for the satellite transport stream.
Important: The TS ID for the satellite transport must be unique across the
DNCS and it should not be the same as any TS ID of either the QAM or SCS
devices that are configured.
Important: The TS ID for the satellite transport must be unique across the
DNCS and it should not be the same as any TS ID of either the QAM or SCS
devices that are configured.
Download Frequency. Enter the frequency to use for the satellite download.
Symbol Rate. Enter enter the symbol rate for the satellite transport in
symbols per second.
symbols per second.
Polarization. From the drop-down list, select the polarization method.
Modulation. From the drop-down list, select the modulation type.
Hub ID. From the drop-down list, select the satellite hub ID.
Cable TS ID. Enter the ID for the cable transport stream modeled using the
SCS identified earlier.
Important: The TS ID for the MMDS transport must be unique for the DNCS
and not conflict with the TS IDs of either QAM or SCS devices.
SCS identified earlier.
Important: The TS ID for the MMDS transport must be unique for the DNCS
and not conflict with the TS IDs of either QAM or SCS devices.
Home TS. Check this box if it is the home transport stream. You must check
this box if the UNConfigIndication for the satellite hub needs to carry
satellite tuning parameters.
this box if the UNConfigIndication for the satellite hub needs to carry
satellite tuning parameters.
6 Click Save.