Cisco Compact Mini Amp Models 93191 & 93198 862 MHz with 42 54 MHz Split Installationsanleitung

593057 Rev E 

Installing and Configuring the GainMaker Line Extender 

2-15 

 Continued 

 

5. 

Tighten the strand clamp bolts (using a ½-inch torque wrench) from  
5 ft-lb to 8 ft-lb (6.8 Nm to 10.8 Nm).  Make sure there is good mechanical 
contact between the strand and the housing. 

Note: A slight tilt of the face of the housing is normal. Cable tension will 
cause the housing to hang more closely to vertical. 

6. 

Connect the coaxial cable to the pin connector according to connector 
manufacturer’s specifications. 

7. 

Proceed to Section B, Configuring the Line Extender Amplifier Module.