Cisco Cisco StadiumVision Director Wartungshandbuch
be manually launched by Management Dashboard DMP command, but is done
automatically when the SV-4K and DMP-2K device boots.
IMPORTANT: Before you power on the SV-4K and DMP-2K
device for the first time, be sure that you have completed the
following configuration and tasks:
device for the first time, be sure that you have completed the
following configuration and tasks:
l
Switch configuration, including the required LLDP for
proper POE+ operation.
proper POE+ operation.
l
DHCP server configuration.
l
Uploaded the released firmware to Cisco StadiumVision
Director.
Director.
l
Configured the auto-registration settings for the SV-4K
and DMP-2K to properly provision its firmware.
and DMP-2K to properly provision its firmware.
However there are some common configuration tasks.
provides a summary of
the firmware provisioning tasks for the SV-4K and DMP-2K and DMP 4310G in the
Management Dashboard.
Table 14. Summary of Firmware Provisioning Tasks on the Media Players
Firmware Provisioning Tasks
SV-4K
DMP-2K
DMP
4310G
4310G
Upload firmware to Cisco StadiumVision Director in the
Management Dashboard
Management Dashboard
Yes
Yes
Configure "Firmware image to use" and "init.version" under
Auto Registration Settings.
Auto Registration Settings.
IMPORTANT: Release 4.1 introduces a new
firmware requirement for "Base firmware image
to use" and "base.version" for the SV-4K and
DMP-2K. See the
firmware requirement for "Base firmware image
to use" and "base.version" for the SV-4K and
DMP-2K. See the
and
Yes
Yes
1
Upgrade the firmware from the Management Dashboard by
selecting DMPs and running the Firmware Upgrade command
to push the firmware to the device.
selecting DMPs and running the Firmware Upgrade command
to push the firmware to the device.
No
Yes
1
The DMP 4310G also uses the "init.build" property which does not apply to the SV-4K media
player.
20 of 80
© Cisco Systems, Inc. All rights reserved.