Cisco Cisco StadiumVision Mobile Streamer Wartungshandbuch
© 2011 Cisco Systems, Inc. All rights reserved.
Page 39 of 103
Bill of Materials for Test Bed
Table 3.
Bill of Materials for Qualification Testbed
Description
SKU
Qty
Laptop with RS-232 DB9 COM port
1
Home router with DHCP server
1
Ethernet cable
2
DMP 4310
DMP-4310G-52-K9
1
HDMI cable
Included with 4310
1
DVI to HDMI adaptor
1
Multi-function 4310 S-Video cable
Custom
1
Power supply for DMP 4310
DMP-4310-PWR
1
Cable for DMP 4310 power supply
CAB-AC-C5
1
RCA audio cable
Included with 4310
1
Standard RS-232 cable for DMP 4310
Included with 4310
1
Standard DB9 to DB9 RS-232 cable
1
RS-232 null modem adaptor – DB9 to DB9
1
Firmware Versions
Qualification starts by recording the firmware version of both DMP and the TVs
being qualified. Changing TV or DMP firmware versions may change the
qualification outcome, hence the results are only valid for the specific versions
tested. Follow these steps to record the firmware versions:
being qualified. Changing TV or DMP firmware versions may change the
qualification outcome, hence the results are only valid for the specific versions
tested. Follow these steps to record the firmware versions:
1. Connect both DMP and laptop to the home router. Then confirm that they
both receive an IP address from the DHCP server.
2. Browse to the IP address of the DMP. From the DMPDM navigate to the
‘Hardware and Firmware Version’ tab. Record the ‘Firmware Release
Version’ and ‘Build Date and Time’ in table 2. If this is not the version that
you plan to use in production then upgrade the DMP to that version.
Version’ and ‘Build Date and Time’ in table 2. If this is not the version that
you plan to use in production then upgrade the DMP to that version.
3. Use the TV IR remote to access the settings menu. Find the firmware version
and record it in table 2. Note that on some TV’s the firmware version is only
accessible via the service menu. If this is the case then consult with your TV
vendor for how to access it.
accessible via the service menu. If this is the case then consult with your TV
vendor for how to access it.