Cisco Cisco 1 GHz GainStar Amplifier Installationsanleitung
Chapter 2 Installation and Configuration
To Install the Housing in a Pedestal
Complete the following steps to install the housing on a pedestal.
1 Drill two 3/8” holes in the mounting plate with 127 mm or 215.9 mm distance.
1 Drill two 3/8” holes in the mounting plate with 127 mm or 215.9 mm distance.
The thickness of the metal plate is 10 to 15 mm.
2 Lift the housing to the proper position on the wall or box.
3 Align the pedestal mounting holes on the bottom of the housing with the two
3 Align the pedestal mounting holes on the bottom of the housing with the two
holes drilled in the metal plate and insert the bolts into the two threaded
mounting holes.
4 Using a ½-inch torque wrench, tighten the pedestal clamp bolts from 6.8 Nm to
9.0 Nm.
5 Connect the coaxial cable to the pin connector according to connector
manufacturer specifications.
6 Proceed to
Installing the Accessories.
18
OL-31945-02