Cisco Cisco Prime Collaboration Assurance 11.5 Weißbuch
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 36 of 64
Logical Discovery
Logical discovery can be done using the Cisco Unified Communications Manager publisher, Cisco
TelePresence Management Suite, Cisco TelePresence Manager, VCS, vCenter, or Cisco UCS
®
Manager IP
as the seed device.
Cisco voice and video infrastructure is discovered using one of the above devices as the seed device. All of the
voice and video infrastructure devices, including video endpoints, are automatically mapped to the appropriate
credential profile and managed automatically if the credentials are successful. We strongly recommended that
you test each credential profile against at least one IP address. Only after all the credentials are known to be
entered correctly should you proceed to do the discovery.
Discovery Using Cisco TelePresence Manager or Cisco TelePresence Management Suite
Navigate to Operate > Device Work Center > Discover Devices and enter an easy-to-find job name; most
importantly, enter the IP address of Cisco TelePresence Manager or Cisco TelePresence Management Suite.
Click Run Now at the bottom of the Device Discovery window (Figure 24).
Figure 24. Device Discovery
As mentioned previously, if Cisco TelePresence Manager or Cisco TelePresence Management Suite is not
deployed, you can also initiate discovery using Cisco Unified Communications Manager or Cisco TelePresence
VCS as a seed device. When the discovery is running, you can check its status by going to the Discovery Jobs
tab in the Device Work Center. The first job listed is always the latest job. The bottom pane of the page shows
details of the job that is selected in the top pane of the page.