Cisco Cisco Firepower Management Center 4000
43-16
FireSIGHT System User Guide
Chapter 43 Configuring Active Scanning
Managing Nmap Scanning
•
Editing an Nmap Remediation
License:
FireSIGHT
Modifications you make to Nmap remediations do not affect scans in progress. The new settings take
effect when the next scan starts.
effect when the next scan starts.
To edit an Nmap remediation:
Access:
Admin/Discovery Admin
Step 1
Select
Policies > Actions > Scanners
.
The Scanners page appears.
Step 2
Next to the remediation you want to edit, click
View
.
The Remediation Edit page appears.
Step 3
Make modifications as necessary.
For information on the settings you can change, see
.
Step 4
Click
Save
, then click
Done
.
The remediation is modified.
Deleting an Nmap Remediation
License:
FireSIGHT
Delete an Nmap remediation if you no longer need it.
To delete an Nmap remediation:
Access:
Admin/Discovery Admin
Step 1
Select
Policies > Actions > Scanners
.
The Scanners page appears.
Step 2
Next to the remediation you want to delete, click
Delete
.
Step 3
Confirm that you want to delete the remediation.
The remediation is deleted.
Running an On-Demand Nmap Scan
License:
FireSIGHT
You can launch on-demand Nmap scans whenever needed. You can specify the target for an on-demand
scan by entering the IP addresses and ports you want to scan or by selecting an existing scan target.
scan by entering the IP addresses and ports you want to scan or by selecting an existing scan target.