Cisco Cisco UCS B230 M1 Blade Server Datenbogen
Cisco UCS B200 M4 Blade Server
SUPPLEMENTAL MATERIAL
59
B200 M4 Configured with 1 CPU
In a B200 M4 configured with 1 CPU, the mezzanine card slot is not under the control of a CPU (in a B200 M4
configured with 2 CPUs, CPU 2 controls that slot). Therefore, the only adapter that can be placed in the
mezzanine slot in a B200 M4 configured with 1 CPU is the Cisco UCS Port Expander Card for VIC, and the VIC
1340/1240 is always required to be installed in the mLOM slot.
configured with 2 CPUs, CPU 2 controls that slot). Therefore, the only adapter that can be placed in the
mezzanine slot in a B200 M4 configured with 1 CPU is the Cisco UCS Port Expander Card for VIC, and the VIC
1340/1240 is always required to be installed in the mLOM slot.
Connectivity using the Cisco UCS 2304 Fabric Extender
The Cisco UCS 2304 is the third-generation Fabric Extender, and shares the same form factor as the current
UCS 2100 and 2200 Series. The 2304 is backwards compatible with the UCS 5108 Blade server chassis.
UCS 2100 and 2200 Series. The 2304 is backwards compatible with the UCS 5108 Blade server chassis.
The options shown in
demonstrate how the server uses these options:
■
VIC 1340/1240 to 2304
■
VIC 1240 plus Port Expander Card for VIC to 2304
■
VIC 1340 plus Port Expander Card for VIC to 2304
In
, two ports from the VIC 1340/1240 are channeled to 2208XP Fabric Extender A and two are
channeled to 2208XP Fabric Extender B. The result is 20 Gbps of bandwidth to each Fabric Extender.
Figure 12
Option 1 - VIC 1340/1240 to UCS 2304 Fabric Extender (no mezzanine adapter)
VIC 1340/1240 Adapter
No Mezzanine Adapter Installed
Mezzanine Slot
mLOM Slot
Port Group A
Port Group B
CPU 1
PCIe x16
2304 Fabric
Extender B
2304 Fabric
Extender A
10G KR
10G KR
10G KR
10G KR