Cisco Cisco Video Surveillance 6620 IP Camera

For 6930 PTZ IP camera: CIVS-IPC-6930-V2.0.0-175.bin

For 7000 series IP cameras: CIVS-IPC-7xxx-V2.0.0-175.bin

Log in and follow the on-screen prompts to download it to your PC.

Take these actions to display the Firmware window in the web interface for your IP camera:

Start Internet Explorer and enter the following in the address field:

protocol://ip_address:port_number

where:

protocol is the connection that you use for your IP camera (either HTTPS or HTTP).

ip_address is the IP address of your IP camera.

port_number is the port number that is used for HTTPS or HTTP connections to the IP camera. 
You do not need to enter a port number if you are connecting through the default HTTPS port 
443 or the default HTTP port 80.

Enter your IP camera user name and password when prompted, then click OK.

The IP Camera Main window appears.

Click the Setup link to access configuration menus for the camera.

Click Administration, then click Firmware.

The Firmware window appears.

In the Firmware Maintenance area, click Browse, choose the upgrade file, and then click Open.

The upgrade file may be stored on another PC.

Click Upgrade.

Do not power down the IP camera during the upgrade procedure.

After upgrading to the 2.0.0 firmware, clear the browser cache, close and reopen the browser to ensure 
the changes from the new firmware are reflected correctly.

After you upgrade the firmware, the IP camera automatically restarts. It retains all configuration 
information.

The following sections provide information about installing the ActiveX client:

Windows 7 with Standard User Rights

Windows XP with Admin Rights

DirectX End-User Runtime (DirectX 9.0 or higher)

DirectX 9.0 installed with Windows XP