Intel SC5250-E Benutzerhandbuch
System Peripheral Bays
Intel® Entry Server Chassis SC5250-E
Revision
1.02
Intel order number C32881-001
22
5. System Peripheral Bays
5.1 3.5" Peripheral Drive Bay
The Intel
®
Server Chassis SC5250-E provides for the installation of a 3.5-inch peripheral, such
as a floppy drive, below the 5.25-inch peripheral bays. The bezel must be removed prior to
floppy drive installation. When a floppy drive is not installed, a snap-in EMI shield must be in
place to ensure regulatory compliance. Cosmetic plastic filler is provided to snap into the bezel.
floppy drive installation. When a floppy drive is not installed, a snap-in EMI shield must be in
place to ensure regulatory compliance. Cosmetic plastic filler is provided to snap into the bezel.
The 3.5” bay is designed so that screws are only required on the left side of the chassis, as
indicated in the figure below. On the right side of the chassis, two protrusions in the sheet metal
hold the drive in place.
indicated in the figure below. On the right side of the chassis, two protrusions in the sheet metal
hold the drive in place.
Figure 23. Drive Bay Locations for Server Chassis SC5250-E