Samsung ProXpress C3060FR Farblaser-Multifunktionsgerät Benutzerhandbuch

•

Do not use envelopes with clasps, snaps, windows, coated lining, self-
adhesive seals, or other synthetic materials.

•

Do not use damaged or poorly made envelopes.

•

Be sure the seam at both ends of the envelope extends all the way to the 
corner of the envelope.

 Acceptable

 Unacceptable

•

Envelopes with a peel-off adhesive strip or with more than one flap that 
folds over to seal must use adhesives compatible with the machine’s fusing 

temperature for 0.1 second about 170 °C (338 °F). The extra flaps and strips 
might cause wrinkling, creasing, or jams, and may even damage the fuser.

•

For the best print quality, position margins no closer than 15 mm from the 
edges of the envelope.

•

Avoid printing over the area where the envelope’s seams meet.

To avoid damaging the machine, use only labels designed for use in laser printers.

•

When selecting labels, consider the following factors:

-

Adhesives: Should be stable at your machine’s fusing temperature about 170 
°C (338 °F).

-

Arrangement: Only use labels with no exposed backing between them. Labels 
can peel off sheets that have spaces between the labels, causing serious jams.

-

Curl: Must lie flat with no more than 13 mm of curl in any direction.

-

Condition: Do not use labels with wrinkles, bubbles, or other indications of 
separation.

•

Make sure that there is no exposed adhesive material between labels. Exposed areas 
can cause labels to peel off during printing, which can cause paper jams. Exposed 
adhesive can also cause damage to machine components.

•

Do not run a sheet of labels through the machine more than once. The 
adhesive backing is designed for only a single pass through the machine.

•

Do not use labels that are separating from the backing sheet or are wrinkled, 
bubbled, or otherwise damaged.